The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1985-GMC · 03-12-2016, 12:20 PM

If you have a spare printed circuit laying around you could try cutting back the top layer of plastic on the damaged one, cut a longer piece of copper trace that will over lap the damaged portion then just super glue a piece of plastic over it to hold it down. If that doesn't work you might have to solder it..

03-12-2016, 12:20 PM	#227
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 86 chevy crew cab 12 valve swap If you have a spare printed circuit laying around you could try cutting back the top layer of plastic on the damaged one, cut a longer piece of copper trace that will over lap the damaged portion then just super glue a piece of plastic over it to hold it down. If that doesn't work you might have to solder it.. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)