[NJ C10 Guy]

Ok, I got it all squared away today. It turned out to be relatively easy, just had to put a little thought into it. The passenger side was really easy, as I was able to just flip the bracket upside down and mount it from underneath without any modifications. I'm sure I'll lose a small amount of sound quality, but in the grand scheme it won't be much due to the rest of my setup.




The driver's side was a little more difficult due to the space and the fact that I couldn't just flip the bracket. I took the existing bracket, flattened out the tabs, measured and drilled holes to mount it. Then I had to finagle the speaker around some to a point where it was relatively flush to mount. I didn't want to risk breaking the tabs on the speaker. Then I had to drill holes in the dash to mount the speakers in place. This was a little bit of a pain and I ended up removing the gauge cluster. I broke one of the brittle plastic tabs putting it back in



My dash fits over top now with no clearance issues at all.