Re: Restoring Rusty
all in all, it was pretty much an all to do about nothing type a day, I worked my butt off but had not much to show for it
I cleaned bolts and washers and more bolts
1. oil pan bolts
2. timing cover bolts
3. water pump bolts
4. intake manifold bolts
5. valve cover bolts
6. crank gear bolts
7. fan bolts
8. fly wheel bolts
9. pressure plate bolts
10. bell housing bolts
I cleaned the oil pan, it may need a little touch up paint
I cleaned the timing cover, its ready for paint and a new seal
I Mickey Moused with the thermostat gasket on the new Vortec intake manifold with a razor blade, until no one was looking, then I called in the heavy artillery
trying to decide weather I clear this thing or paint it Cast Iron to match the heads and the block, its pourous and a pain to clean, I can only imagine it being a dirt and grime magnet in the truck
hey I cleaned my workbench.... again
Last edited by Gregski; 03-22-2016 at 02:06 AM.
|