[XwalkerX]

with the key on and taking readings at the module with the connector plugged into it im getting these readings

a- 0v (toggle switch is in the off position)
b- 0v
c- 0v
d- 12v
e- 0v
f- 12v
g- 10v
h- n/a
j- 0v
k- 9v


also I forgot to include that I have an inline fuse wired in to the power wire right before the bottom split on my diagram

I also picked up a 12v zenner diode this weekend that I have yet to wire into the G wire to get rid of that voltage going to the brake lights until the pedal is pressed.