The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

scott-wisc · 03-30-2016, 07:28 AM

The photo is of the 3/4 set up. The 1/2 ton a arm is at least an inch wider.

03-30-2016, 07:28 AM	#6
scott-wisc Registered User Join Date: Feb 2012 Location: Wisconsin Posts: 144	Re: C/20 to 5 bolt conversion The photo is of the 3/4 set up. The 1/2 ton a arm is at least an inch wider.