Re: 1951 Chevy / C4
I cut ot the latch area and welded my patches and the made patches for the lower hinge area. Then welded them in to. Going to make the uppers when I have the power windows and the 1 piece glass done. The uppers will be made of 1/8 inch with a cage nut made in the back so it can be adjusted from the outside and no wrench needed for the nut on the back side. Then was looking and the 3 rear cab support were flapping in the wind. So I made a London piece so I can cut 3 out of it and repair all 3 .
Shannon
|