Re: 1951 Chevy / C4
Henry, it is so cool to see how people do things. There are a lot of different way to do things.
Started the morning finishing up the transmission tunnel. I sheared 2 1 inch wide strips and used the stretcher shrinker to get my radius , then weld it on and ground it up. Then cut and weld the 3 lower cab supports in the rear of the cab. I had 2 4x11 inch areas in the rear of the floor that I had to made so they are now done too. I had to hole saw a hole in each of them because that is where the rear cab bolts are.
Shannon
|