Re: Harold's '48 S10 LS1 Build
My one big goal this weekend was to get the grille in and start work on fitting the lower grille support and the front section of my inner fender wells.
When I tried to install the grille, the front of my frame was hitting the vertical braces on the grille. Times like these makes me regret not putting a modern suspension under the old frame. I pulled off the two supports of the grille that were hitting the frame. I got the grille in with a bit of slotting and cussing, and not necessarily in that order. It seems that the holes in the fender did not line up with the holes in the radiator support.
|