The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 65- Factory Tank for EFI

urmyboyblue · 05-12-2016, 02:02 PM

Have you considered using a surge tank? That way, you can avoid a second fuel port in your tank and keep air and fuel starvation from being an issue. The down side is you need a second pump to get fuel to the surge tank. I have an aftermarket tank with a sump in the back. It had a return line plumbed into it so I did not need to add a line. There is a baffle and the back half is filled with foam to minimize sloshing. Works well so far.

As for pumps, I use a Walbro GSL 392. Good pump-you can get them on line relatively cheap.

05-12-2016, 02:02 PM	#8
urmyboyblue Registered User Join Date: Feb 2015 Location: Montevallo, AL Posts: 272	Re: 65- Factory Tank for EFI Have you considered using a surge tank? That way, you can avoid a second fuel port in your tank and keep air and fuel starvation from being an issue. The down side is you need a second pump to get fuel to the surge tank. I have an aftermarket tank with a sump in the back. It had a return line plumbed into it so I did not need to add a line. There is a baffle and the back half is filled with foam to minimize sloshing. Works well so far. As for pumps, I use a Walbro GSL 392. Good pump-you can get them on line relatively cheap.