Quote:
Originally Posted by Low Elco
Good lookin' stuff, Vic! Thanks again for helping Boppa the other day.
|
Hey, no problem Chip, anything to get a ride in Yeller.
Quote:
Originally Posted by Hart_Rod
Your fuel module looks good! Did you use fuel line that can be submersed in fuel? I found out the hard way that you can't just use normal fuel hose as the exterior of the line is not designed to be submerged in fuel and will deteriorate over time. Just a heads up.
|
Good catch, Rob. The box the Aeromotive pump came in included the filter, the hose and a couple of clamps. I used their hose, so I assumed(!) it would be suitable. Their installation instructions said nothing about the components other than anything in the system should be compatible with the fuel. But to be sure, I looked at the FAQ on their website and found no mention of it. So I waited on hold for one of their tech guys who confirmed that the fuel hose (and the rubber gasket in the weather pack connector) are designed for immersion in fuel. Hopefully it will last for many miles of smiles.
Quote:
Originally Posted by jlsanborn
There's a hot tip!
Outstanding work Vic, as usual!
|
Thanks, John!