Re: Plus Five
Well,
today I put together the braided stainless flex lines for the power steering
and transmission.
What a pain in the ...
The instructions say to wrap black tape tight around the area to be cut, then cut thru the tape with a cut-off wheel. For the fuel lines, this worked great. For the powerflex and speed flex hose it started to unravel as soon as it was cut. The plastic coated braided stainless also swelled just enough that it wouldn't slip thru either.
I fooled around with different methods, then settled on a .020 aluminum wrapped around and hose clamped. I cut the hose right next to the aluminum sleeve while the hose clamp was tight. Then I loosened it just enough to slide and gave it a quick push and it slipped thru the fitting just fine, and no unraveling.
Glad that job is finished!
__________________
53 Chevy Pickup
|