Quote:
Originally Posted by chevy2tom
Metaldoc, more info on this setup please!
|
I used the original center holes to start. Re-drilled the cross members 6 1/8 on centers out from there. Welded nuts in all the holes. 1 1/2 x 3/16 flat bar as hold downs drilled 5/16 holes through. 5 3/8 x 1 composite deck board. I'll be using 1/4 x 1 allen cap screws from the top. I cut the boards from 12 foot lengths.
8 x 12' composite
10 x 1 1/2 x 3/16 flat bar
200 nuts, bolts