[akdg87]

Well my th350 took a dump, second gear starter slipping pretty bad. So I found a th400 and dropped it off to be built. Just yanked the th350 out, set a record time of 40 minutes to having it on the ground. A lift would be so much easier but maxing out the height on the jack stands works fine for now.

So I will end up doing a remote mount trans cooler with fan and a thermal switch to activate it. There just isn't enough room up front for a decent size cooler.

Need to have the driveshaft modified and flip the trans crossmember around. Still unsure of what to do with my torque convertor; the fluid was dark. Thought about flushing it with some clean trans fluid and mineral spirits, anyone ever done this? The other option is to send it out and have it cut open and cleaned.