The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aotte1** · 06-21-2016, 10:12 PM

Kimble,

Thanks for the heads-up on resealing the T221. The shaft seals are "CR" 17386 and shifter " National" 480954. They came from shop in MN, that does a lot of 4x4 work. He also warned me about the shims, go slow, "no impacts- breaks the cover", hand wrench only.

Going to try double seals on the shafts per suggestion.

DD thanks for the information on how much your front end settled once built!

Les

06-21-2016, 10:12 PM	#303
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 64' K10 Project Long Bed Kimble, Thanks for the heads-up on resealing the T221. The shaft seals are "CR" 17386 and shifter " National" 480954. They came from shop in MN, that does a lot of 4x4 work. He also warned me about the shims, go slow, "no impacts- breaks the cover", hand wrench only. Going to try double seals on the shafts per suggestion. DD thanks for the information on how much your front end settled once built! Les Attached Images Last edited by aotte1; 06-21-2016 at 10:18 PM.