Thread
:
Winter Beater Build- '66 BBW Custom Short/Fleet with Heat!
View Single Post
06-25-2016, 01:19 PM
#
116
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,870
Re: Winter Beater Build- '66 BBW Custom Short/Fleet with Heat!
Haven't taken much time to work on the truck until lately. Got the bed pulled off, scuffed it down with red scotchbrite pads and dish detergent, and shot it with satin clear. I was surprised at how much color came back. The bed floor is finished except for bolting in two boards. I didn't want to bolt through the wood like factory, instead I'll bolt the cross rails down and notch the back of the wood to clear the bolt heads. Gives it a little bit of a cleaner look without the bolt heads showing up top. Also picked up a pair of 15x8's for the rear. Dad bought a '66 short/fleet a couple months ago so it has some company in the parking lot now.
Before and during scuffing:
After spraying clear. I used Duplicolor lacquer, half gloss and half satin mixed.
Bed floor installed.
15x8's
Parked with dad's '66.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
theastronaut
View Public Profile
Find More Posts by theastronaut