Thread
:
72 k20 project
View Single Post
07-10-2016, 11:33 AM
#
1543
ryanroo
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project
i decided to rebuild the alternator mount. it had the stock cummins upper mount and an adapter plate i made to space it up a bit. i wanted something one piece.
part of the motivation for that was the need for air inlet tubing support. i made a bracket down low and a support rod off of the alt mount for the top. now the compressor snout wont be supporting the weight.
next was oil lines. i used a strait and a 90* #10 ORB adapter to get out of the oil cooler housing.
the #10 lines split into #8s and go to the dual filters in parallel. they are not tied down in the pics, i built them and hid them on the shelf so they are not in the way for now.
__________________
72 K20 12v
build
72 K20 "parts truck"
A place for your diesel swap questions
ryanroo
View Public Profile
Find More Posts by ryanroo