[Gregski]

now I never made my own spark plug wires before so I decided to cut them in such a way that if things went South I could maybe recover by being able to make another wire from the part of the long wire that I cut off

so for example if I had to make a 22" wire I did not make it out of the 31" one but I used the 55" instead that way I could make two 22" wires out of it if need be, follow me Vern?

anyway this way I had enuff wire to make another 22" wire for #8 also MSD threw in 3 extra crimp ends so I was golden

this time when making the wire I tested along every step of the process

so cut the wire to length and test it

crimp one end and test it

crimp the other end and test it

and it turned out good, it now reads 948 so 517 Ohms per foot - GOOD