Re: 67 C10 "Green Gobblin" straight from the field!
Ok first up is chop down and shorten the passenger bedside! Ive seen a lot of different ways to shorten box sides but nothing really stood out to me since i didn't want to just chop the whole backside or frontside off. The front cut i kept close to the edge to eliminate warping and save as much original paint as possible. That should help with my paint blending later! I did make it complicated for myself though as i staggered the cut on the outside vs the inside box. I used tape to keep my lines paralell and it was also an aid for the measurements.
Last edited by 6t9camaro; 07-29-2016 at 04:11 PM.
|