Quote:
Originally Posted by Possmguts
lol.. there's only 2 thin layers of mud and a little glaze on it... I use a big piece of Plexiglas on big areas for spreading... It really helps speed it up... and then DA with 50 grit to get it down it down and then use like an 18 inch block with 80 grit to finish... and then use the high build with finer grit with the block...The body lines was not an issue on this spot.
|
I have seen video's of people using Sheetrock mud blades to spread the mud. so you mixed a rather large amount of mudd, a couple cups per application? I'm using the 1'x1' onion brand paper stacked mixing board where you mix, apply then throw away the top sheet of paper, maybe i need to find a bunch of cardboard boxes and mix larger amounts..
Is your high build a quart can or spray can? brand?
I have been using 80 grit on my long board but following that with 180, It still takes many applications of my spray can high build to get everything filled.
In your pic is that high build Primer or is that K2?