Re: Let's Build A 1 Ton Crew Cab 4x4
Here is the mockup. I still have to weld it together. Doing this puts my spring pad at almost dead 0deg, which will put my caster angle back around 8 deg like it is supposed to be.
Now to get it all welded together, both sides installed and axle back under it.
I am so ready to be finished with chassis/suspension!
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
|