|
Re: 87 Chevy Crew Cab 4x4 Converion/Cummins swap
Quote:
Originally Posted by DieselRat
You talking under the springs? I got the 3 pack shims from offroad design. I went with 4* shims. I only did 2" lift so I just sorta guessed at it because I got them when I got the springs. Looks like its gonna be about right where I need it to be.
|
Sounds about right. Only problem is that it doesn't fix your caster angle. Only problem I see with converting these truck to 4x4. I fixed it on my truck but if the caster part doesn't bother you then should be good to go. I am thinking about going back to 2" lift springs as well, considering when I fixed my angles it added nearly another 2" of lift on top of my 4" lift springs.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
|