|
Re: Factory Body Shimming
Quote:
Originally Posted by Cape Codder
I disagree if it doesn't line up before replacing parts it may be worse after. I would get it all aligned up and fitting as you want it and keep checking as you weld in the new panels. You need to fit the rockers to the door with the doors fitting the body.
|
It's hard to line up rusted out and missing sheet metal......
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
............. 
|