Quote:
Originally Posted by lsversaw
Thanks, Ranger and Andy. I'm currently chasing a wild hair (hare?): a setup that would drive left and right (doors or kickpanels), center (existing dash location), and two surround speakers (in the rear corners) -- five locations, with 4 different combination of left and right -- all from 4 channels of speaker outputs. I'll post my findings here.
|
Look at the Zapco 6 channel amp. Then you would be driving all 6 speakers with individual gain control.
Z-150.6 Sound Q Street Series
Features and Functions
6-Channel, Class-AB Sound Quality Amplifier
Stable into 4 ohms bridged or 2 ohms stereo load
PWM MOSFET power supply
High end Op-amps and Capacitors
Variable FULL / LP / HP Electronic Crossover
0dB, 6dB, 12dB selectable bass boost
4-way protection circuitry
Wired remote control (optional)
Panel mount RCA connectors
Specifications
Power @ 4Ω: 6 x 150 watts
Power @ 2Ω: 6 x 300 watts
Power @ 4Ω Bridged: 3 x 500 watts
THD @ Rated Power < 0.05%
Signal to Noise Ratio > 90dB
Channel separation > 60dB
Frequency Response 10Hz to 30,000Hz ±1dB
Input Sensitivity .25v to 8v
Dimensions in mm: 190(W) x 62(H) x 573(L) Overall: 190(W) x 62(H) x 614(L)