[Desperado454]

Plan was to get the motor running but I didn't want to run it without a radiator, so in the meantime i've been picking away the body. Started by welding in the wheel well patches and then focused on fixing the fronts of the quarters. Of course I didn't get a pic of the ugliness I started with but got one of the patch before i welded it in:



And here's both sides after being welded:





With that wrapped up, i put the body back on the hoist so i could spray the bottom with epoxy and coat all the bare metal spots as well.



This is the frame after i stuck the welting on:



Then it was time to put the body back on the frame. Took a couple pics of the big moment:





Couple pics of it back together: