|
Re: LMC shoulder strap seat belt installation
On mine, I didn't get them from LMC. I used the factory seat belt retractor bolt hole. I added a 90* bracket that was included in my kit. I placed it under my retractor and secured it with a grade 12 frame bolt and then added another nut to the bottom side. I attached the other part of the shoulder belt to the 90* bracket. I might change it because I need some more room in the seat belt. My seat sets up pretty high so with the seat belt on, you don't have much room to move forward and it is annoying.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|