The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NastyBuzzard · 10-03-2016, 06:18 AM

This will kill your motivation right here. I wasn't out at the shop 5 minutes before I almost grabbed this bastard. Right on my Kmember at the front door of the shop.

Started messing with making the 2wd motor mounts worked. The plan is to develop a xmember for 4x4 conversions using 2wd mounts. I am out of cutting disks now, it took 4 of the cheapo harbor freight brand cutting disks.

Otherwise it was a busy weekend so didn't get much else. I will hopefully get something modeled up soon.

10-03-2016, 06:18 AM	#314
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,276	Re: Let's Build A 1 Ton Crew Cab 4x4 This will kill your motivation right here. I wasn't out at the shop 5 minutes before I almost grabbed this bastard. Right on my Kmember at the front door of the shop. Started messing with making the 2wd motor mounts worked. The plan is to develop a xmember for 4x4 conversions using 2wd mounts. I am out of cutting disks now, it took 4 of the cheapo harbor freight brand cutting disks. Otherwise it was a busy weekend so didn't get much else. I will hopefully get something modeled up soon. __________________ 1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF 2020 1500 Silverado 3.0 Babymax 2002 2500 Silverado- 6.6/ Allison 2010 CTS V- The "NastyBuzzard" 1979 Trans Am - Eventually getting 6.0/T56 swap with boost