The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Clavo106 · 10-23-2016, 04:32 PM

Thanks guys. I took it out first thing this morning. And tryed tightening it with it out with the 3/8 but it bottom and kept spinning... so I chased it out with a 7/16 tap and ran a 7/16 bolt and it got tight. Problem fixed...engine mounts installed now with 7/16 bolt.. I did tap with a 3/8 tap before I installed it the frist time. And I did try a 7/16 bolt but the bolt didn't want to go in.. o well got fix that's all I care about.. thanks for the help..

10-23-2016, 04:32 PM	#7
Clavo106 Registered User Join Date: Apr 2015 Location: Yakima, WA Posts: 362	Re: new engine mount q's. Thanks guys. I took it out first thing this morning. And tryed tightening it with it out with the 3/8 but it bottom and kept spinning... so I chased it out with a 7/16 tap and ran a 7/16 bolt and it got tight. Problem fixed...engine mounts installed now with 7/16 bolt.. I did tap with a 3/8 tap before I installed it the frist time. And I did try a 7/16 bolt but the bolt didn't want to go in.. o well got fix that's all I care about.. thanks for the help..