[Figuarus]

Ok. First and foremost, I'm sorry this took me a bit to do. I've been working and doing a lot of favors for other friends. I managed to finally take some pictures tonight. Again I apologize if they're not clear. You can see where the original harness from the truck was wired into the new fuse block using butt connectors. The new fuse block was mounted to the firewall with a simple L bracket. The beauty of this setup as you can see is that it is expandable for future wiring needs. While it is not labeled, the fact that there are very few circuits from the factory means that if anyone is blown you can see it almost right away. I hope this gives you some insight on how to do this mod.