Quote:
Originally Posted by Nomadicflyer
Floor patch in, runner reinforcements. Pics of tack welding 1/2 and 1 inch angle iron along the floor lines, underneath. They now have a much better looking bead running along the seams.
Before I bought the welder, hired someone to put in rockers. Once I started reading how it's supposed to be done, I had to go back and do some touch up work on the panels. Cleaned up with some glass/Everclear.
|
You are doing some nice work on Miss Olive, Under the cab rockers were you going to seal the rough edge? I have used Sika flex 1a Polyurethane caulk for many years with good results. Prime 1st and run a bead in the corner, then paint over or undercoat after it's dry 24-36 hrs. also have used it on vertical joints etc, stays flexible..3m 5200 is also good.