Re: Random?
Here's a picture of the kenwood.. today I bled the cooling system and put the exhaust in. Sounds great! Since I have no tank, I ran it off a gas can and it fired right up. My set up was gas can, filter, Carter p4600hp, filter, regulator, holley dp. My gauge on the regulator was reading 5 psi then went down to 3 psi. Truck was still idling fine though.. I took apart both the pump and regulator and cleaned them out. Still no pressure change. I put the gauge right after the pump to rule out the regulator and still no pressure change. Got frustrated and ordered a new pump, regulator, and gauge.
|