Quote:
Originally Posted by ochre1971
I'll be doing body mounts soon as well, feel free to offer any worthwhile advice. Also, do you have any details on the roll bar or if that same model can be bought somewhere? It looked like you were able to find yours used.
thanks
|
I used the information that is here on the site for replacing the body mounts and is very useful. Worthwhile advice I would say is get a bunch of good dust/particle masks or respirator and safety glasses because you will be getting a ton of rust junk in you face.
If your mounts have never been replaced cut the bolt heads off spray WD or something and drive them out and you will save yourself a bunch of time.