Thread
:
55 Wagon Progress
View Single Post
11-15-2016, 01:50 AM
#
782
MP&C
Registered User
Join Date: Jan 2013
Location: Leonardtown, MD
Posts: 1,637
Re: 55 Wagon Progress
Thanks guys!
The final two days of the Maryland Tommasini Metalshaping Class. We had two stumps that we gave to students to take home, here is the final version carved....
https://www.youtube.com/watch?v=5yH-M21yUok
I had some requests to show the mammoth sand bag with the loose cover removed... It saw quite a bit of use and came in handy!
More repair parts were made for the 37 Dodge doors...
The crease or "swage" at the top center of the hood was difficult to locate through the paper pattern.
So the upper and lower "crease" was highlighted by using fineline tape alongside. Then a pencil was used on the outside of the paper pattern, which now showed the location. Better shown here:
https://www.youtube.com/watch?v=miZW1aOWwXg
The halves still need to be welded together using O/A.
Two of the ball glove pounding pads were put into service for metalshaping, one using shot, the other using sand..
Peter showed lead loading method for aluminum...
__________________
Robert
MP&C
View Public Profile
Find More Posts by MP&C