[reaper71]

Update time..

Pic #1. So I got started on the floors Tuesday and it started off ok, in this first shot all was going good.

Pic #2. When these go together pieces go under one and then under another panel and is a puzzle and the pieces I have, some are bowed not bent correctly etc.
Making it difficult to assemble.

Pic #3. It's hard to see all the humps and lumps in these pics. but let me tell you there is alot of waves going on. This shot shows how things are a bit Wonky.

Pic #4. After fighting with this most of the morning I was able to get the floors fitting decent.

Pic #5. And by end of Day I had this (All mock up at this point) It wall all be blown apart and prepped to be welded.

Till I tried to fit the door and things got silly, and I spent most of Wednesday trying to get it all lined out and had to go take pics of a Friends Bronco and measurements to see if I was on the right track.
Good news was it was right on it needed some adjusting and it was lined up.

So I took things apart last night so I can start the prep work.

Till next time.
Mark...