|
Re: striped th350 pan bolt holes
Quote:
Originally Posted by forestb
So from what I am hearing you all don't think that I would be able to put a nut on the other side?
|
Nope.
Is this one of the corner bolt holes with 5/16"-18 threads? If so, your next step up in size is 3/8". But either way, you may not have room to drill and tap.
Metric probably won't work here because 8mm is only .050" larger than 5/16", and 10mm is larger than even 3/8".
__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
|