I used the schematics from the 2010 Camaro (
http://www.revbase.com/BBBMotor/Wd) as the basis for modifying the harnesses. I probably went a little over kill on how many fuses and relays I used, but I wanted the poor fella down the road that might have the pleasure of owning this truck to not give up on fixing it if a problem arises. So, the plan was for 15 fuses and 7 relays as the brains of the operation to support the new harness mod. I am happy to report that no electrons were killed in the making of this harness mod.
Also, want to throw a big thank you out to
http://lt1swap.com/wiringharness.htm
Not the end all for what I needed, but he helped push me in the right direction until I found the schematic database link at the top.
I will attach a swap spreadsheet I used throughout the process at the end of the thread. It has all the wiring info and part numbers used for the swap.