The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - IA 1967-71 Doors

**Dieselwrencher** · 01-11-2017, 06:20 PM

I have a pair of empty doors for 1968-1971 trucks that I got from a board member in MN. I know they fit 68-71, not 100% if they are totally correct for 67 and 8s. These doors have no rust through, just surface rust. There are a lot of surface rust spots probably from rock chips from what I can tell. Along the pinch weld is solid. There is some minor bulging in the pinch weld but no soft spots. There are spots on the skin that mirror holes were welded up. The LH door has had a crack repaired below where the upper hinge mounts. The welds need dressed and body worked. The LH one has a dent on the inside above the door panel. There aren't any other big dents in them. A light sand blasting and these will be really nice doors. $250 OBO for the pair. I will ship these through Fastenal or Greyhound at the buyer's expense.

See below. These doors do not fit a 67 unless you use a 67 door handle. Thanks to Cheyenne shortstep for that info.

01-11-2017, 06:20 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	1968-71 Doors I have a pair of empty doors for 1968-1971 trucks that I got from a board member in MN. I know they fit 68-71, not 100% if they are totally correct for 67 and 8s. These doors have no rust through, just surface rust. There are a lot of surface rust spots probably from rock chips from what I can tell. Along the pinch weld is solid. There is some minor bulging in the pinch weld but no soft spots. There are spots on the skin that mirror holes were welded up. The LH door has had a crack repaired below where the upper hinge mounts. The welds need dressed and body worked. The LH one has a dent on the inside above the door panel. There aren't any other big dents in them. A light sand blasting and these will be really nice doors. $250 OBO for the pair. I will ship these through Fastenal or Greyhound at the buyer's expense. See below. These doors do not fit a 67 unless you use a 67 door handle. Thanks to Cheyenne shortstep for that info. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 01-16-2017 at 04:53 PM.