View Single Post
Old 02-01-2017, 01:53 PM   #8
mrods72
Registered User
 
mrods72's Avatar
 
Join Date: Sep 2009
Location: Brenham, TX
Posts: 64
Re: Honey Dripper 1976 C10 build

Current state of the truck. I am running Modern Vintage Systems wiring harness for the 5.3 and 4L80E. Trick turbo log manifold and TBSS manifold on drivers side, Dirty dingo engine mounts and Dirty Dingo low mount A/C bracket with a mini sanden, Aeromotive Phantom 450 flex fuel pump in the tank a 255lph on the frame that will come on at 7 psi with -8an feed and return lines. Holley EFI fuel rails, Aeromotive fuel pressure regulator, turbosmart wastegate and BOV, Champion radiator with custom brackets to move it back so I could mount the vintage air A/C condenser behind the intercooler. I relocated the battery under the truck using a drop down battery box also.
I am currently getting everything wired and plumbed and then I will bolt the front clip back together and fire it up! I cannot wait!
Attached Images
  
mrods72 is offline   Reply With Quote