Quote:
Originally Posted by 1972K20
Sounds like fun. I've got a Dana 60F and Dana 70HD rear I'll be getting into soon.
|
Dana axles are my least favorite to set up. If you want to save yourself a lot of grief, either buy or make setup bearings for the carriers and inner pinion bearing. And buy, rent, beg, borrow, or build a case spreader. And never, EVER spread the case more than .010".
__________________
1991 V1500 Blazer (Silverado), 5.9L 12V P-pumped Cummins (5x .012 sac injectors, #6 fuel plate, WH1C with external 38mm wastegate running 30psi), NV4500 with 1-⅜" input shaft, SBC Con-O clutch, NP205, HAD, 4.10 D61/14BFF spinning 37" Nitto Exo's
"I got a shotgun, a rifle, and a four wheel drive and a country boy can survive."