Quote:
Originally Posted by Andy4639
One of mine on the 71 C 10. Place a on off switch on the brake pedal assembly and tie it to the brake wire that runs to the proportioning valve. Put the other side to ground.
Installed and working like it was from the factory!
With key on the dash light is on anytime the E brake is engaged. It will cut off as soon as the E brake handle is pulled!
With the key off it want light up either.
The round light is my 71 the stock was of another vehicle.
|
I did the same thing but welded a tab on the pedal, then drilled and tapped it to use an original door switch for the dome light.
http://67-72chevytrucks.com/vboard/s...d.php?t=425922 this is a thread that has more info on how to wire it up.