Quote:
Originally Posted by dme922
I put all new glass and felt in my doors and my windows are lacking about 1/8 to a 1/4 of an inch from sealing at the top. I already checked to see if the window frame was hitting the fuzzies/anti rattle seals and it is clearing just fine. Any suggestions?
|
When I put new door channels in my last build, the windows were pretty hard to roll up that last quarter of an inch. I ended up putting a little lithium grease on in the channels.
Quote:
Originally Posted by LockDoc
Rob, You would have to weld a tab to the inside of the outside door skin for the screw to tap into.
LockDoc
|
Thanks Doc. Would you happen to have a picture of the tab?