Quote:
Originally Posted by Donnie Lee
Question on oil pans; we have '05 GTO LS2 with factory front sump oil pan & need to change to rear sump. After much searching it appears the LS1 pan #12628771 is what we need. When you change to this oil pan do you also change the oil pump pickup, windage tray, dipstick tube, dipstick, o-ring for oil pump pickup. I found the part #'s for all these items on LS1 Tech in the LSX Oil Pan thread. Of course we would change the pan gasket as well & all of the bolts if I can find them listed.
Thanks For Any Assistance
|
Yes, you'll need the pick up tube, windage tray and dipstick tube. When you have the GTO pan off, don't forget to knock out the little plug in the block where the dipstick goes, otherwise you'll be pulling the pan again!