Re: 72 blazer ls swap
Your not hijacking, as all the questions you want. I also could not find that info. I started my own mounts then gave up. So it was easier for me to reference the head. With a straight edge laying on the frame and touching the rear mounting bolt webbing on the block, the head is slightly over an inch. I'd say 1 1/8"
I also took a picture of the gas tank to axle spacing so show why the original gas tank brace gets moved back.
__________________
Anthony
1972 K5 4x4
1969 Camaro SS
1987 Grand National
1985 Cutlass
|