The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**First c10** · 04-02-2017, 12:34 AM

Driver and passenger taillight housings. I am going LED's built by rob here on the forum.

I did trim the bottom of the driver housing. Now that I look at it I might not have needed to trim it. I may get another and try it untrimmed.
I may also just well studs to the bed and put nuts on the inside. Currently you can see the stove bolts under the taillight, maybe the trim would cover.
I will try the trim on and see if it covers the screw heads.

Now i need to weld up all the holes in the bed and put a dent or 2

04-02-2017, 12:34 AM	#650
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Driver and passenger taillight housings. I am going LED's built by rob here on the forum. I did trim the bottom of the driver housing. Now that I look at it I might not have needed to trim it. I may get another and try it untrimmed. I may also just well studs to the bed and put nuts on the inside. Currently you can see the stove bolts under the taillight, maybe the trim would cover. I will try the trim on and see if it covers the screw heads. Now i need to weld up all the holes in the bed and put a dent or 2 Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!