The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rust hole · 04-06-2017, 11:40 AM

Eureka!!the body is free. the bolt that goes thru the plywood on the drivers side was the trouble. H ad to take a cut off wheel and dice it up then use a BFH!

I under estimated the height I would need to clear the wheels so back to home depot for more 4x4s. Any thought on how many cross supports one should use and locations. Currently 1 under front doors and 1 in rear wheel well (not ideal) I was thinking 1 in front and behind rear wheels

Thanks, Damon

04-06-2017, 11:40 AM	#16
Rust hole Registered User Join Date: Mar 2013 Location: St. Augustine, Fl Posts: 59	Re: frame off advice Eureka!!the body is free. the bolt that goes thru the plywood on the drivers side was the trouble. H ad to take a cut off wheel and dice it up then use a BFH! I under estimated the height I would need to clear the wheels so back to home depot for more 4x4s. Any thought on how many cross supports one should use and locations. Currently 1 under front doors and 1 in rear wheel well (not ideal) I was thinking 1 in front and behind rear wheels Thanks, Damon