While I had the core support off I drilled holes, then welded some nuts down for the inner fender to mount. Yes, I know my welds are not the prettiest, but for guessing on the settings for the welder, I think I did pretty well.
![Name: 101_1800.jpg
Views: 244
Size: 38.9 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1643203&d=1492446965)
Then we hung up all of the parts we needed to paint black and sprayed some wax and grease remover on the parts to prep them
![Name: 101_1802.jpg
Views: 241
Size: 38.3 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1643204&d=1492446965)
Here is my dad starting to spray the core support
![Name: 101_1803.jpg
Views: 245
Size: 41.3 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1643205&d=1492446965)
We moved the parts outside so the paint would dry in a reasonable amount of time