The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**First c10** · 05-08-2017, 01:36 AM

Ok so I worked on the bed a little tonight.
First thing I was able to level out the cab and bed.
Second I adjusted a 1" gap between the cab and bed.
Third I measured the bed and am 1" to far forward in the rear wheel well. So I marked up the front of the rear wheel well with a black sharpie. I moved the lower section 1" forward and was thinking to cut a sliver of metal(pencil marks)
Has anyone seen this to correct the gap? or did they move the rear axle back?

05-08-2017, 01:36 AM	#670
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Ok so I worked on the bed a little tonight. First thing I was able to level out the cab and bed. Second I adjusted a 1" gap between the cab and bed. Third I measured the bed and am 1" to far forward in the rear wheel well. So I marked up the front of the rear wheel well with a black sharpie. I moved the lower section 1" forward and was thinking to cut a sliver of metal(pencil marks) Has anyone seen this to correct the gap? or did they move the rear axle back? Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!