The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Convert Single Reservoir Power Brakes to Duel Reservoir Power Brakes.

**jocko** · 05-22-2017, 08:46 PM

here's how I did it. http://67-72chevytrucks.com/vboard/s...d.php?t=487384

non-power though, but you could simply use one of member CaptainFabs booster brackets to tuck it in close to the firewall. Looks fairly stock, takes up less room, uses easily available parts/boosters, etc. When you buy the MC though, make sure you buy one for power brakes - the depth of the hole the brake push rod goes into is different between masters.

EDIT: OOps, missed the fact that you already have power - so, I'd just buy a stock power brake master cylinder for a 67 C20 and go from there.

05-22-2017, 08:46 PM	#3
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,935	Re: Convert Single Reservoir Power Brakes to Duel Reservoir Power Brakes. here's how I did it. http://67-72chevytrucks.com/vboard/s...d.php?t=487384 non-power though, but you could simply use one of member CaptainFabs booster brackets to tuck it in close to the firewall. Looks fairly stock, takes up less room, uses easily available parts/boosters, etc. When you buy the MC though, make sure you buy one for power brakes - the depth of the hole the brake push rod goes into is different between masters. EDIT: OOps, missed the fact that you already have power - so, I'd just buy a stock power brake master cylinder for a 67 C20 and go from there.