Well its real easy to install. There should only be to wires on the CB, a ground and power with a fused link. Just hook the ground to any good grounding spot. I would splice the power wire into the stereos inginition wire, it will probably be the easy way to go, unless you have a spot on the fuse panel where you can plug in the wire, marked ingition unfused. Then just screw on the coax cable from the intenna to the back of the cb. and it should work.
__________________
1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires
2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10
2003 Jeep Rubicon 4.5" short arm lift
1985 Jeep CJ7 30k in parts and still adding up
|