|
Re: 1991 V3500 Project Heavy Hauler
This one was actually the sender, but through no fault of its own. It got beat up a little bit going in and out of the truck with my various attempts at building the correct combination of fittings for it to fit. The electrical tab actually broke off the top, hence the open circuit. New sender is installed.
Also bed is wired for camper, mounts and pad are on and tailgate is off. Tomorrow is the day. Wired the lights from the rear using a 25' 4 wire trailer kit, and power and ground from my auxiliary battery with 10 awg wire and fuses at both ends.
|