The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**1rippen6** · 06-23-2017, 07:29 PM

If you want a challenge I think the bottoms of that vintage bench seat could be made to work. The front foot is the same and the back could be made the same with a simple modification. The track is longer it would need to be cut to length and a couple of holes drilled. That being said if your top track is shoot then your out of luck. Another thing is I'm not sure how the track comes apart I only needed one bracket and didn't go any further. Also you will need to rivet it back together I made a threaded plate and attached the foot back on with ss allen bolts.

06-23-2017, 07:29 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,714	Re: 1970 Blazer bucket seat mount options If you want a challenge I think the bottoms of that vintage bench seat could be made to work. The front foot is the same and the back could be made the same with a simple modification. The track is longer it would need to be cut to length and a couple of holes drilled. That being said if your top track is shoot then your out of luck. Another thing is I'm not sure how the track comes apart I only needed one bracket and didn't go any further. Also you will need to rivet it back together I made a threaded plate and attached the foot back on with ss allen bolts.